24/7 Emergency Garage Door Repairs · Residential & Commercial · Free Quotes

Perth Garage Door Specialists

Custom & Architectural Garage Doors in Perth

On a well-presented Perth home the garage door is often the single largest element of the street elevation, and it is the one most likely to be an afterthought. Perth has excellent custom door manufacturers, and it has capable repair firms, and until now those have been two separate industries — the people who build architectural doors are supply-and-install businesses, and the people who fix doors have generally never worked on one. SwiftRoll does both. We specify and fit custom doors in Western Red Cedar, timber-look and real timber, aluminium and thermopanel, powder-coated and custom-finish steel, and we design the specification around what the door will have to survive where it lives — UV on a west-facing elevation, salt within a few kilometres of the coast, and the maintenance the finish will genuinely need. Then we service it, which is the part that is normally nobody's job.

  • We fit custom doors and we service them — in Perth those are usually two different companies
  • Specification driven by orientation and salt exposure, not by the sample book
  • Springs and motor sized to the finished door's real weight, which is where heavy doors fail
  • Honest maintenance expectations for timber finishes stated before you choose, not after
  • Existing architectural doors repaired and refinished, whoever originally supplied them

Get a Free Quote

Tell us what's happened — we'll call you straight back.

Add a message (optional)

No obligation · Free on-site quote · 24/7 emergency

What's included

What our custom doors covers

The door is a third of the elevation. It should be treated that way. Here's what we handle across Perth:

  • Western Red Cedar and real-timber doors
  • Timber-look and woodgrain finishes on steel and aluminium
  • Contemporary aluminium and thermopanel doors
  • Custom powder-coat and colour-matched finishes
  • Flush-fit and shadowline sectional doors
  • Side-slide and bi-fold configurations for restricted headroom
  • Glazed, slatted and perforated panels for light and ventilation
  • Doors specified to match cladding, screening or front-door timber
  • Heavy-door motor and spring specification
  • Heritage and character-area appropriate designs
  • Ongoing servicing and finish maintenance for custom doors
  • Repair and refinishing of existing architectural doors
Western Red Cedar sectional garage door on a contemporary Perth street elevation

How it works

What to expect when you call

1

Look at the house, not the catalogue

Elevation, orientation, materials already on the building, and what the door sits next to. A door that ignores the front door timber and the roof colour will look wrong however well it is made.

2

Specify for where it lives

West-facing elevations take serious UV. Anything within a few kilometres of the coast takes salt. Both change which finishes and which hardware make sense, and both change the maintenance you are signing up for. We say all of that before you choose, not after.

3

Engineer the mechanics for the weight

Custom doors are heavy, and the springs and motor have to be specified to the finished door's actual weight rather than to a nominal figure. This is where architectural doors most often go wrong mechanically — a beautiful door on an under-rated system.

4

Fit, set up, and keep servicing it

Fitted square, balanced by hand, motor set up properly, and then put on a service interval appropriate to the finish and the location. Your door is not handed over and forgotten.

Where we work

Custom Doors in 44 Perth suburbs

We provide custom doors right across the Perth metro area. These are the suburbs with a dedicated local page for it — find yours for the detail and response time:

Trusted locally

Custom Doors — what customers say

Colour matched to the roof and gutters with samples held up against the house rather than picked off a chart. Small thing, but it's the difference between a door that looks new and one that looks stuck on.
Meredith S. Churchlands
We have a cedar door that nobody wanted to touch — the company that supplied it doesn't service, and the repair firms hadn't worked on one. These people did both. Checked our warranty terms before starting, too.
Stephen G. Dalkeith
Very straight about what timber would actually need on a west-facing frontage. I'd been told by someone else that it was maintenance-free, which it plainly isn't. We went ahead with our eyes open and I'm glad we did.
Antonia F. Cottesloe

Swipe to see more →

Other garage door services

Free on-site quote

Need custom doors in Perth?

Our technicians run right across the Perth metro area and reach most emergency callouts in around 60 to 90 minutes, with the springs, rollers, motors and panels on board to finish most repairs in one visit. Call now or request a free quote — no obligation, no surprises.

Good to know

Custom Doors FAQs

Is a cedar garage door a bad idea in Perth?

Not at all — but it is a commitment, and anyone who tells you otherwise is selling. Western Red Cedar is beautiful, stable and light for its size, which is why it is used on custom doors. In Perth's UV it needs recoating on a schedule, and a west-facing cedar door needs it more often than a south-facing one. If you want the look with less upkeep, timber-look finishes on aluminium have improved enormously. We will tell you which one suits how you actually live rather than which one has the better brochure.

Can you service a custom door someone else installed?

Yes, and it is a large part of this work. Architectural doors are frequently supplied by manufacturers who install and then move on, leaving the owner with a heavy, expensive door and no obvious person to call when it starts running rough. We service and repair custom doors regardless of who supplied them, and we check the original warranty terms first so nothing we do puts your cover at risk.

My house is in a character area. What am I allowed to fit?

That depends on your local government and on whether the door is visible from the street. Several Perth councils apply design controls in character and heritage precincts, and they tend to care about proportion, material and how the door reads from the footpath rather than about the mechanism behind it. We have fitted doors under those constraints and we will tell you at the quote what is likely to be acceptable — but the approval is between you and your council, and we will never tell you something is approved when it is not.

Why does a custom door need a different motor?

Weight. A timber or thermopanel door can weigh substantially more than the steel door it replaces, and the springs and motor have to be specified to that finished weight. Fitting a standard package motor to a heavy custom door is the single most common mechanical failure we see on architectural installations — the motor labours from the first week and the gearbox goes early. We size both to the real weight, which occasionally means the mechanical package costs more than people expect.

How long does a custom garage door take?

Custom doors are made to order, so the lead time is the manufacturer's, not ours — it is materially longer than an off-the-shelf door and varies with the material and the finish. We give you the current realistic lead time at quote and we do not shorten it to win the job. If your existing door has failed and you need the garage secure in the meantime, we will make the old one safe and usable while the new one is built.
Call Now — Free Quote